The 4x4 Hybrid is a matrix of Hybrid Couplers arranged so that signals
applied to any of the four inputs will be split equally between the four outputs.
This allows combining of multiple signals in the same wireless band to a com-
mon feeder cable, as might be required in a neutral host in-building distributed
antenna system. Unused output ports must be terminated externally in 50W,
with an appropriate PIM performance. Note that the phase relationship of the
outputs in this model is not consistent.
Special attention has been directed to maximize isolation in the wireless
bands and minimize passive intermodulation (PIM). Unit also available with
7-16 DIN or N connectors as part of the CM-x8D or CM-x8N series.
Impedance: 50W nominal
PIM, Intermod: -161 dBc (two 20W tones)
Environment: -40 to +55°C
Housing Finish: Painted
Connectors: 4.3-10
