GPSS216
GPS Active Splitter 2 antenna input
16 GPS output SMA(f) 1RU
SKU
GPSS216
Search
GPS Active Splitter 2 antenna input
Product Description
Microlab’s Lossless GPS Signal Splitters can be used to distribute UTC synchronization to up to 32 remote units using only 2 redundant GPS antenna signals. The GPS signal quality is actively monitored by this system and can be combined with the Microlab Digital GPS Signal Repeater where GPS signals are not readily available. 16-channel and 32-channel options are available with up to +10dB selectable gain
Specifications
Download Datasheet# RF output ports 16
GPS Bands Supported GPS L1 (1575.42MHz)
Gain @ 1575.42MHz 0dB or 10dB ± 1dB
Input/Output VSWR (max) 14dB
Impedance 50 ohms
Gain Flatness (max) 0.5dB
Amplitude Balance (max) ±1.0dB Port to port
Input Isolation between Antennas (min) 50dB
Output Isolation (min) 20dB
Noise Figure (max) 4dB
Output IP3 (min) -7dBm
Input P1dB (min) -20dBm
DC supply to antenna ports +5V nominal, 50mA max
DC load to output ports 200ohm, 1/4W