Questions? Feedback? powered by Olark live chat software

FP-14N

LOW PIM ATTENUATOR, 200W,N-M/F,
694-2700MHz

SKU
FP-14N

Features

  • Increases Load Power Capability
  • Lowers Power by up to 100W
  • Adjusts Power for 100W components
  • Very Low PIM
  • Up to 200W average Input Power
  • Low VSWR
  • Intimate cable contact for good heat dissipation
  • RoHS compliant
  • For Indoor applications

Product Description

Microlab FP-10 series Cable Attenuators are intended for wireless applications, requiring modest power reduction while maintaining extremely low PIM, (Passive Intermodulation). A typical application is to dissipate 100W of power so the signal may be fed directly to components rated at 100W max, such as a Low PIM Termination. This power increase might be required to terminate the unused port of a Hybrid Coupler when combining two 200W signals in the same band.

The Cable Attenuator requires a finned heat sink to dissipate the heat, similar to that found on resistive attenuators and similarly assumes an ambient temperature up to +55°C.

Specifications

Download Datasheet
Frequency: 698 - 2700 MHz
Attenuation: 1.9 for 700
Attenuation: 1.9 for 700
  2.1 for 850
  2.2 for 960
  3.2 for 1850
  3.5 for 2100
  3.9 for 2600
Power: 100W maximum *Derate -1.2%/°C.above 55°C
VSWR: <1.15:1 for FP-xxN
PIM: -161 dBc, tested using with 2x 20W tones of 1805 & 1880 MHz at 25°C
Connectors: N-Type
Ingress Protection: IP64
Weight: 6.00 lb(2.73)