These Hybrid Couplers have industry leading 30dB port to port isolation. They are most commonly used to combine two wireless carriers in the band to a single antenna feed or distribution cable. This requires the termination of one output port in 50W and results in a 3 dB loss in each signal. In situations where two similar feeds are required, as required for an in-building application, both outputs may be used eliminating the need for a termination and the 3 dB loss. For powers to 400W see CA-86N.
Connectors, spaced to allow controlled wrench tightening, are available with alternate genders. See below for models with integral terminations, and for outdoor environments add suffix ‘P’ to Model No. (e.g. CA-84NP).