Questions? Feedback? powered by Olark live chat software


HYBRID COUPLER, 3dB, 380-520MHz,



  • Low Specified PIM performance
  • Models for Outdoor Environments
  • High Isolation, Low VSWR and Loss
  • Single and Dual Band Ranges Tetra, SMR/PMR, Cellular, PCS and UMTS
  • Rail Standard EN 50155:2007 (Class T1) Certified
  • High Reliability, Moisture sealed
  • Easy mounting to pole or wall

Product Description

These Hybrid Couplers have been designed to meet the special needs of the wireless market. They are most commonly used to combine two wireless carriers in the band to a single antenna feed or distribution cable. This requires the termination of one output port in 50W and results in a 3 dB loss in each signal. In situations where two similar feeds are required, as required for an in-building application, both outputs may be used eliminating the need for a termination and the 3 dB loss. For powers to 400W see CA-86D.
Connectors, spaced to allow controlled wrench tightening, are available with alternate genders. See below for models with integral terminations, and for outdoor environments add suffix ‘P’ to Model No. (e.g. CA-84NP).


Download Datasheet
Frequency: 380 - 520 MHz
Coupling: 3 dB nominal
Power: 100W
VSWR: 1.15:1
Isolation: >30
PIM: -161 dBc (-118 dBm) (2 tones at +43 dBm)
Connectors: 7-16
Ingress Protection: IP64
Weight: 1.44 lbs. (644g)