Hybrid Coupler 2×2 694-2700MHz 80W -161dBc N-type IP64
CA-84N
Please Register or call for more information
These Hybrid Couplers have industry leading 30dB port to port isolation. They are most commonly used to combine two wireless carriers in the band to a single antenna feed or distribution cable. This requires the low PIM termination on one output port and results in a 3 dB loss in each signal. In situations where two similar feeds are required, as required for an in-building application, both outputs may be used eliminating the need for a termination and the 3 dB loss. For 200W power see Microlab CA-86 series.
This coupler is a 90° Quadrature Hybrid. Connector spacing allows controlled wrench tightening. For outdoor environments add suffix ‘P’ to Model No. (e.g. CA-84EP).
- Standard Bandwidth for commercial wireless applications
- Guaranteed Low PIM
- 30dB Port to Port Isolation
- Models for Outdoor Environments
- Low VSWR and Dissipative Loss
- Rail Standard EN 50155:2007 (Class T1) Certified
- High Reliability, Moisture sealed
- Easy mounting to pole or wall
| Frequency: | 694 – 2,700 MHz | |
| Coupling: | 3 dB nominal | |
| Power: | 80W | |
| VSWR: | 1.20:1 | |
| Isolation: | >30 | |
| PIM: | -161 dBc (-118 dBm) (2 tones at +43 dBm) | |
| Connectors: | N-Type | |
| Ingress Protection: | IP64 | |
| Weight: | 1.44 lbs (644g) | |