Microlab’s GPS/GNSS Signal Splitter can be used to distribute GPS/GNSS RF signals from a single antenna to multiple devices. They are designed for locations where extra gain is needed in the RF path. The splitter has an LNA with an extremely low noise figure and bandpass filter. The splitters do not require any external power supply and operate directly from the power provided by the GPS receiver. The other outputs are DC terminated
| Frequency: | 1.559-1.610 GHz |
| Gain: | 6.0 ± 1.0 dB |
| Power: | -10 dBm |
| Noise Figure: | 3 dB |
| VSWR: | 2.0:1 |
| Output Isolation: | 20 dB min, port to port |
| DC Current Consumption: | 5mA min, 10mA max. |
| Connectors: | SMA (f) |
| Ingress Protection: | IP67 |
| DC Voltage for Antenna: | +5.5V max on Port 1 +3.6V min. |
