[Hurricane Recovery Support](https://microlabtech.com/hurricane-recovery-support.html) | Email us at HurricaneRelief@rfindustries.com
[Hurricane Recovery Support](https://microlabtech.com/hurricane-recovery-support.html) | Email us at HurricaneRelief@rfindustries.com
powered by bulletin

CA-84N

Hybrid Coupler 2×2 694-2700MHz 80W -161dBc N-type IP64

Please Register or call for more information

SKU: CA-84N Categories: , ,

These Hybrid Couplers have industry leading 30dB port to port isolation. They are most commonly used to combine two wireless carriers in the band to a single antenna feed or distribution cable. This requires the low PIM termination on one output port and results in a 3 dB loss in each signal. In situations where two similar feeds are required, as required for an in-building application, both outputs may be used eliminating the need for a termination and the 3 dB loss. For 200W power see Microlab CA-86 series.
This coupler is a 90° Quadrature Hybrid. Connector spacing allows controlled wrench tightening. For outdoor environments add suffix ‘P’ to Model No. (e.g. CA-84EP).

  • Standard Bandwidth for commercial wireless applications
  • Guaranteed Low PIM
  • 30dB Port to Port Isolation
  • Models for Outdoor Environments
  • Low VSWR and Dissipative Loss
  • Rail Standard EN 50155:2007 (Class T1) Certified
  • High Reliability, Moisture sealed
  • Easy mounting to pole or wall

Download Datasheet 

Frequency: 694 – 2,700 MHz
Coupling: 3 dB nominal
Power: 80W
VSWR: 1.20:1
Isolation: >30
PIM: -161 dBc (-118 dBm) (2 tones at +43 dBm)
Connectors: N-Type
Ingress Protection: IP64
Weight: 1.44 lbs (644g)

Title

Go to Top